Camara Robot Vehiculo Wifi, Laser. Vigilancia, Espionaje....

CONTROL TOTAL BAJO PROGRAMACIÓN DEL USUARIO, REQUIERE CONOCIMIENTOS BÁSICOS DE REDES Y ALGO DE PROGRAMACIÓN SENCILLA.

• SE PUEDEN PROGRAMAR RUTAS!
• BATERÍAS RECARGABLES
• REPUESTOS DISPONIBLES EN LA INTERNET

APLICACIONES IDEALES:

• VIGILANCIA PROGRAMADA
  
• BÚSQUEDA Y RESCATE
  
• DIVERSIÓN
  
• PROGRAMACIÓN PARA ESTUDIANTES Y AMANTES DE LA ROBOTICA

LISTO PARA ENTREGA INMEDIATA, DESPACHAMOS A TODO EL PAÍS (NO INCLUYE EL COSTO DE ENVÍO)
POCO USO: SOLO SE UTILIZÓ PARA HACER CONFIGURACIONES BÁSICAS DE CONTROL


Características (inglés), directo del fabricante:

Specifications

• 500MHz Analog Devices Blackfin BF537 Processor (1000 integer MIPS)
• 32MB SDRAM, 4MB SPI Flash
• JTAG (tested with section5 ICEbear USB-JTAG)
• SPI Flash and UART boot mode select
• External I/O Header (32-pin - 16 x 2 x 0.1")
  • 3.3V Input - 145mA total draw at 500MHz, including camera
  • Board dimensions - 50 mm x 60 mm (2.0" x 2.6"), 36g (1.25 oz) including camera module
  • 2 UARTS - tested at up to 2.5Mbps with CTS/RTS flow control
  • 4 Timers (2 share pins with UART1)
  • SPI - 2 slave select, 1 master select
  • I2C
  • 16 GPIO
  • "S-32 expansion bus" header will support stacking of expansion boards
  • RoHS compliant
• Omnivision OV9655 1.3 Megapixel Sensor (with support for OV7725 low light VGA sensor)
  • AA Format Module (32-pin header - 16 x 2 x 0.1")
  • Interchangeable Lens - M12 P=0.5 format (12mm diameter, 0.5mm thread pitch). Standard lens is 3.6mm f2.0 (90-deg), optional 2.2mm f2.5 (120-deg)
  • Camera header on production board is 90-degree female (vs straight female header shown in top left photo) - 90-degree expansion connector available to place camera parallel with processor board
  • RoHS compliant
• Radio/Motor Control Module
  • WiFi communication via Lantronix Matchport WLAN 802.11g radio
  • u.fl connector to external antenna
  • On-board 3.3V high efficiency switching regulator (Recom R-783.3-1.0) for battery input (4.75 - 18.0 VDC)
  • Dual H-bridge motor driver (Fairchild FAN8200) with 1000mA capacity per motor
  • 2 switching transistor drivers with 100mA capacity for laser range pointers
  • Board dimensions - 50 mm x 65 mm (2.0" x 2.6"), 10g (0.4 oz)
  • Mounts to SRV-1 Blackfin Camera via 32-pin external i/o header ("S-32 expansion bus")
  • RoHS compliant
• Stereo Vision System
  • Two SRV-1 Blackfin Cameras separated by 10.75 cm (4.25")
  • Interprocessor communications via SPI bus (64MHz)
  • WiFi communication via Lantronix Matchport WLAN 802.11g radio w/onboard 3dB dipole antenna
  • On-board 3.3V high efficiency switching regulator (Recom R-783.3-1.0) for battery input (4.75 - 18.0 VDC)
  • Headers for 8 servos (5V supply provided)
  • Dual H-bridge motor driver (Fairchild FAN8200) with 1000mA capacity per motor
  • Two switching transistor drivers with 100mA capacity for lights and laser pointers
  • Low battery detect circuit
  • Headers for 8 servos (5V regulator provided)
  • Extended pin headers for full access to S-32 expansion bus of both processors
  • Board dimensions - 60 mm x 150 mm (2.5" x 6.0"), 140g (5 oz)
  • 1" x 2" mounting hole pattern for compatibility with SRV-1 robot base (dual and quad motor versions)
  • RoHS compliant
• Default Firmware
  • Full-speed frame capture direct to SDRAM at 1280x1024, 640x480, 320x256 or 160x128 pixel resolutions
  • JPEG (Motion JPEG) compression
  • Basic image processing - histogram, pixel sampling, mean, frame difference, blob, scan, count, find
  • Motor control for PWM (H-bridge) and PPM (servo) interfaces
  • Built-in C interpreter for scripting and autonomous operation
  • Real-Time-Clock (milliseconds since reset), internal timer resolution to 10 nanoseconds
  • Direct control of I2C and SPI devices
  • In-Application-Programming (IAP) of flash memory
  • XMODEM protocol for reliable file transfer
  • Direct support for up to 4 Maxbotics ultrasound rangers, Locosys GPS and Honeywell HMC6352 compass
  • Compiled with GNU Blackfin Toolchain (bfin-elf-gcc) 
  • Can be replaced by u-boot / uClinux